Catalog

Concave Design Microswitch reliability tested to 10,000,000 cycles. Vertical attached microswitch with standard 0. 187" (4. 8mm) terminals. 28mm H...

Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We o...

There are 3 different cables for these joysticks. Please look at the images below and determine which cable you need. The joystick INCLUDES the cab...

Convent One Piece Design, not super long like other style buttons. 28mm Screw Type If you need encoder wires get them HERE

Convert your Japanese style ball top joystick to the more recognized American style. This will work on: Sanwa Zippy Arcade1Up AtGames Legends  

There are 2 different 4 pin cables for these joysticks. Please look at the images below and determine which cable you need. 1.Double 4 Pin Wave 1/2...

Replaces Sanwa Part Number:GT-Y This GT-Y plate is compatible with the Sanwa JLF series joysticks: JLF-TP-8YT(-SK) JLF-TP-8Y(-SK) JLF-TP-8S...

Want To Install A Pandora's Box Or Raspberry Pi In Your Arcade1Up? Then You Need This Board!***The days of simple are gone, A1U has too many 17" LC...

Microswitch Reliability Tested To 10,000,000 Cycles Vertical Attached Microswitch With Standard 0.187" (4.8mm) Terminals 12V or 5V. If you need en...

The 4lb tension spring can be used as a replacement for the existing spring found in the Sanwa JLF series of Joysticks. Modding your Sanwa JLF joys...

Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We o...

Runs on 12 volt (will not power on 5v). These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size...

Inline Toggle Switch To Control LED Lights Plugs Inline Between The Power Supply and Light 1/4 Hole Size to Mount 5.5mm x 2.1mm Female / Male Ba...

Plastic push button with translucent bezel Black center for Eclipse look LED holder .250" terminal size Fits wood or metal control panels Pushbu...

5.5x2.1mm Barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires with...

1 x Female Input2 x Male Output Barrel is standard size 5.5mm x 2.1mm

One End is a Standard 0.187" (4.8mm) Terminals Other End is a 2 Pin JST Commonly used on Encoders and Arcade1Up 12 Jumpers Per Pack

1 x Female Input 3 x Male Output Barrel is standard size 5.5mm x 2.1mm

This is a complete kit to convert a VERTICAL Arcade1Up machine like Pac-Man or Galaga over to a 60 in 1 jamma based setup. This is a 90% compete ki...

Runs on 5 volt. Button connection Size: 0.110 (same size as standard sanwa) We offer the led harness for these in our store! Convent One Piece Des...

Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We ...

Arcade Quality Buttons! Microswitches included inside the Button! fits in most Hori and MadCatz joysticks Microswitch reliability tested ...

6MM Ball Thread.

This cable is a premade to wire between our 16A power supply to the EMI filter. Makes installing a power supply in your cabinet a breeze.