Catalog

  Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We ...

Rated Voltage : AC 250V, 50/60Hz;Rated Current : 6A Mounting Hole Diameter: 2.23" x 1.12" CE Approved

Used To Wire Two 25 Cent LED ButtonsButtons Must Be No More Then 5 Inches ApartIncludes 3 Foot Extension CablePlug and PlayWithout being hooked int...

12mm Size button Momentary - Does not stay pressed down once released requires a 0.50" hole 0.110 terminal size 3A /125VAC 1.5A/250VAC

This Trackball Is Plug And Play With The iCade 60 in 1 Ball Size: 2.25" Width: 3-13/16 Length: 3-13/16 Height: 1 1/2 Mounting hardware so...

World Wide Input Voltage 100-240VAC 50/60Hz 12 Volt Power Supply - 2.5 Amp Standard 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: P...

See Wave Information To Know what panel you need to order. Most common is Wave1/2 Direct replacement for Arcade1Up machines Made from Baltic birc...

Color Options Red | Blue | Yellow | White | Green | Orange | Purple This is a complete control deck upgrade kit for the Street Fighter Arcade1Up ma...

See Wave Information To Know what panel you need to order. Most common is Wave1/2 Direct replacement for Arcade1Up machines Made from Baltic birc...

Have a idea for a awesome CPO? One of our default panel layouts just not right? We can change it and make it especially for you. Here is what we ne...

Arcade Encoder For Happs Style (complete w/Cables) - Fits Standard 0.187" (4.8mm) Terminals1 - Arcade Encoder1 - USB cable12 - Happs Style Jumpers

Output: 12V DC (5.0A) Fits Both 5.5mm x 2.5mm or 5.5mm x 2.1mm Input: 100-260VAC 50/60Hz 60 Watt Max Works With All Pandoras Box Arcade With A De...

Shaft Diameter: 9mm Adds 15mm of Height Compatiable With Sanwa, Zippy, JS19 and other Joysticks That Are 9mm.

1/16 Thick Plexi Glass 100% Clear All Holes Are Cut To Fit Factory A1U Bezel Holes 17.7" x 17.55 - Verify this will fit your machine.

Use this cable to hook a Sanwa joystick into a standard 0.187 terminal end jamma hanress. Simply plug the U D L R into the correct slots and hook t...

Feature: Hard plastic, long lifespan. High quality 12v LED standard Illuminated arcade push buttons. Will work on wood or metal control panels.S...

The 6lb tension spring can be used as a replacement for the existing spring found in the Sanwa JLF series of Joysticks. Modding your Sanwa JLF joys...

Direct replacement for Arcade1Up machines Made from baltic birch Includes t Molding Color Choice Includes Heavy Duty 10mil Polycarbonate. No Plex...

This Trackball Is Plug And Play With The iCade 60 in 1 Ball Size: 2.25" Width: 3-13/16 Length: 3-13/16 Height: 1 1/2 Mounting hardware so...

Some machines have a 3 wire power switch. Verify before purchase. If yours has 3 this kit will of course not work. We do not have a 3 wire setup ...

Jamma harness with 2x28pins 56 pin connector that can be used for standard jamma arcade cabinet (machines) and pcbs. All wiring uses 22awg ,cheape...

Fits all wood and metal type control panels Smooth spring return-to-center Round red ball handle with strong steel shaft 4-way or 8-way ope...

Our custom designed PCB will allow anyone to simply and quickly install a Pandoras Box Family Edition into a arcade cabinet. This pcb also has a 12...

This is a drop in panel that replaces the factory Arcade1up front panel below the control deck. This allows for a easy install of two 28mm-30mm bu...