New products

See Wave Information To Know what panel you need to order. Most common is Wave1/2 Direct replacement for Arcade1Up machines Made from Baltic birc...

See Wave Information To Know what panel you need to order. Most common is Wave1/2 Direct replacement for Arcade1Up machines Made from Baltic birc...

Color Options Red | Blue | Yellow | White | Green | Orange | Purple This is a complete control deck upgrade kit for the Galaga Arcade1Up machine. T...

Plexiglass for Our A1U control Panels. Specs: 1/8 Cast Plexiglass. Will Be Cut To Match The Panel You Are Ordering This Is NOT FOR the A1U factory...

Concave Design Microswitch reliability tested to 10,000,000 cycles. Vertical attached microswitch with standard 0. 187" (4. 8mm) terminals. 28mm H...

Microswitch Reliability Tested To 10,000,000 Cycles Vertical Attached Microswitch With Standard 0.187" (4.8mm) Terminals 12V or 5V. If you need en...

Runs on 5 volt. Button connection Size: 0.110 (same size as standard sanwa) We offer the led harness for these in our store! Convent One Piece Des...

Convent One Piece Design, not super long like other style buttons. 28mm Screw Type If you need encoder wires get them HERE

There are 3 different cables for these joysticks. Please look at the images below and determine which cable you need. The joystick INCLUDES the cab...

Includes Cable For 412 In 1 To Trackball (specifically made for this) Ball Size: 2" Width: 2-13/16 Length: 2-13/16 Height: 1 3/8 Mounting hardware...

Cable length: 36 Inches Supports resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), 1920x1200 (WUXGA), and up ...

This power cord is the last piece of the puzzle to getting your arcade up and running. Featuring a three foot length, this cable is ideal for any a...

See Wave Information To Know what panel you need to order. Most common is Wave1/2 Direct replacement for Arcade1Up machines Made from Baltic birc...

Replaces Sanwa Part Number:GT-Y This GT-Y plate is compatible with the Sanwa JLF series joysticks: JLF-TP-8YT(-SK) JLF-TP-8Y(-SK) JLF-TP-8S...

Replaces Sanwa Part Number:GT-8F Allows 4 Way or 8 Way Play compatible with the Sanwa JLF series joysticks: JLF-TP-8YT(-SK) JLF-TP-8Y(-SK) JLF-TP-...

This cable has a sanwa style connector on one and with preinstalled terminals for the Arcade1Up 4 connector. This comes with the cable and two 4 co...

Color Options Red | Blue | Yellow | White | Green | Orange | Purple This is a complete control deck upgrade kit for the Atari 12 in 1 Arcade1Up mac...

There are 2 different 4 pin cables for these joysticks. Please look at the images below and determine which cable you need. 1.Double 4 Pin Wave 1/2...

Want To Install A Pandora's Box Or Raspberry Pi In Your Arcade1Up? Then You Need This Board!***The days of simple are gone, A1U has too many 17" LC...

3.74" Outside Diameter 2.95" Mesh Speaker Grill Size 3.30" Center To Center Hole Mounts ABS Outside Ring Speaker Grill Is Metal Mesh

The Harness Will Allow You To Plug A Home Edition Pandora 40 Pin Into Standard 28 Pin Jamma Harness This Is A Plug And Play Cable Length Is Abo...

Color Options Red | Blue | Yellow | White | Green | Orange | Purple This is a complete control deck upgrade kit for the Street Fighter Arcade1Up ma...

5.5x2.1mm Barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires with...

56 solder pads (28 per side) Connections pins are labeled for easy reference Approximate dimensions: 4.4in (L); 0.07in (W); 1.0in (H)